描述
General purpose carbide grinding rod
- JU12/JU12F :It is both good hardness and toughness, it is recommended for the finishing of alloy steel (HRC40~55), stainless steel, titanium alloy or fiber reinforced composite materials ,etc.
- JF06: It is recommended for the finishing of aluminum magnesium alloy, iron base alloy, carbon fiber, etc.
- JF10.2/JF12: It is recommended for the finishing of cast iron, stainless steel, ordinary alloy steel (HRC<48), heat-resistant alloy, etc.
- JL10: It is a universal tool material,recommended for thefinishingof ordinary steel, cast iron, stainless steel, etc
- JL10.2: It is a cost-effective universal tool material. Recommended for processing cast iron, stainless steel, ordinary alloy steel (HRC<48) processing.
| Grade | ISO Code | Grain ize
μm |
Cobalt ontent
Wt% |
Density
g/cm3 |
Hardness | TRS(ISO3327)
N/mm2 |
|
| HV3 | HRA | ||||||
| JU12 | K30-K40 | 0.4 | 12.0 | 14.10 | 1750 | 92.5 | 4200 |
| JU12F | K30-K40 | 0.4 | 12.0 | 14.10 | 1830 | 93.0 | 3800 |
| JF06 | K05-K10 | 0.6 | 6.0 | 14.90 | 1850 | 93.1 | 3800 |
| JF10.2 | K20-K40 | 0.6 | 10.2 | 14.30 | 1700 | 92.3 | 3800 |
| JF12 | K30-K40 | 0.6 | 12.0 | 14.15 | 1680 | 92.0 | 3900 |
| JL10 | K20-K30 | 0.8 | 10.0 | 14.42 | 1630 | 91.7 | 4000 |
| JL10.2 | K20-K40 | 0.8 | 10.2 | 14.50 | 1600 | 91.5 | 3900 |
评价
目前还没有评价